Filter Cleaning As Needed

When it comes to routine maintenance for your pool, cleaning out the filter is perhaps one of the most recognized and important chores.

Why is filter cleaning important?

Keeping a properly cleaned filter affects your entire pool. The filter is like the foundation of your pool system. It must be cleaned regularly to ensure a clean, clear swimming area. After all, you probably do not want leaves, trash, and other debris floating around in your water making it murky and dirty.

The filters can also affect the pump. If the filters are not cleaned out regularly, they can become clogged. If the filters become clogged, the pump could potentially back up and even flood. Your entire pool cleaning system could be at risk.

How often should filters be cleaned?

How often pool filters should be cleaned really depends on the size of your pool and your surrounding area. The number of people that swim in your pool can also affect the amount of debris floating around in your pool for the filters to catch.

The frequency of how often to clean your pool filters is usually determined by the measurement of pressure (PSI) of the pool water through the filters and pump. The PSI is determined using a pressure gauge.

Typically, filters need to be cleaned two or three times during the pool season. If you have a lot of people swimming in your pool, typically have a lot of algae in your pool, or if there is a lot of pollen and other debris in your area you might need to clean your filters more often.

How do I clean my pool filters?

Cleaning your pool filters can be an involved process depending on what kind of pool cleaning system you have.

Generally, you will need to shut off your pump system in order to start any pool maintenance. This is the first step for any general pool maintenance, because if anything happens to your pool maintenance system, you could potentially be in for very costly repairs. Better to be safe than sorry.

Methods for cleaning pool filters will vary based on your pool cleaning system, but usually after turning the pumps off you will need to find the pressure gauge on the filter cartridge and relieve the pressure. Drain the water from the filter, and after the filter is finished depressurizing it will be safe to remove the filter.

After you have removed the filter, you will typically use a hose to wash off the filter. Every so often, depending on the amount of debris, you will want to soak the filter in a special cleaning solution.

How can a professional pool service help?

Depending on what kind of pool you have, cleaning pool filters can be a difficult and involved process. You can avoid a lot of trouble and ensure proper maintenance of your pool equipment by letting a professional perform these tasks for you. A professional pool service, like Hersey Pool Service in Jacksonville FL, will know exactly how to check, clean, and replace filters as needed.

Leave a Reply

Your email address will not be published.